Uncategorised

Uncategorised (4996)

Just south of Aberdeen, improvements continue to be made at Scottish Water’s Sludge Treatment Centre (STC) in Nigg – but at a site still approaching its full potential, 0.9~1.0MW per tonne of Dry Solids is already being consistently produced.

2020 10 23 082159Part of its trailblazing route-map to lead the water industry to net zero emissions and beyond by 2040 (five years ahead of the Scottish Government’s ambitious plan to become carbon neutral by 2045), Scottish Water’s go ahead STC at Nigg is becoming a showpiece energy generation centre.

In recognising some sweeping transformations that would have to happen over the next 25 years to achieve its target, Scottish Water’s refurbishment at Nigg has seen an upgrade of Cambi’s Thermal Hydrolysis Process (THP) – and the introduction of a new Digester Mixing System – from Landia.

Scottish Water was a pioneer in 2001, when it commissioned the fifth ever Cambi THP plant. Over the past two years, Cambi has modernised outdated control and measurement systems – and is currently upgrading the heat exchangers. The plant can treat up to 60 tonnes of dry solids per day, but further improvements could increase this considerably.

“A quarter to one third more biogas than we were previously”

Simon Wrigglesworth of Scottish Water Services, Grampian, said: “We’ve still got work to do, to deliver the full suite of improvements – and will keep fine tuning – but since the refurbishment, taking everything into consideration, we are producing approximately a quarter to one third more biogas than we were previously”.

He added: “We’ve come a long way since the old compressor mixing system at Nigg, which failed regularly. This resulted in the effective digester volume being reduced, because the fouling up of vessels with an accumulation of solids lessened the amount of gas that we could produce”.

When the two 4,000m3 digesters at Nigg were cleaned out during the centre’s refurbishment, it was revealed that 45% of the volume had been lost due to grit and heavily compacted sludge. Central to the need to help make this STC electrically self-sufficient and significantly reduce its carbon footprint was the important choice of a new mixing system.

“We looked at various options”, continued Simon Wrigglesworth, “but as has been proven, Landia, who were confident that their system could handle the thickness of the sludge, did exactly what they said they were going to do. There was nothing showy; they gave us a good feeling right from the start and provided an impressive whole life cost analysis. They were clearly very determined to bring about the benefits we required”.

Both digesters at Nigg are now fitted with two diametrically-opposite Landia Chopper Pumps, which draw thick liquid from the bottom of the tank, where solids are chopped to accelerate the digestion process and prevent clogging of pipes and nozzles.

“A 25% to 30% increase in our gas production”

2020 10 23 082107In the first stage of the mixing process, the liquid is injected into the upper half of the tank, whilst biogas is aspirated from the top of the tank and mixed into the liquid. This not only has the benefit of reducing buoyancy at the surface of the liquid, but also sees the rising gas bubbles continue to mix after the pumps are switched off. With two 30kW systems on each digester, the installed power of the Landia mixing system equates to a very economical 15 watts per cubic meter. When factoring in reduced running times, as low as 20 minutes in the hour, energy savings are substantial. Reduced running times also means that pump-wear components last significantly longer.

Cambi’s proven Thermal Hydrolysis Process (THP) exposes sewage sludge at Nigg to high temperatures (1600C to 1800C) and pressures (about 6 bars), typically for 20 to 30 minutes for each batch to ensure pathogen kill. Sterilised and hydrolysed sludge is passed to the flash tank, which operates at atmospheric pressure. The sudden pressure-drop leads to substantial cell destruction of the organic matter in the sewage sludge, which is then cooled to its optimum temperature before it is fed to the digesters.

“Post-refurbishment”, concluded Simon Wrigglesworth, “we’ve now had a decent period of stabilisation, with no major hiccups in the performance or reliability of the Cambi and Landia equipment.

“With a 25% to 30% increase in our gas production, we’re in such a better place”.

www.landia.co.uk

www.cambi.com

DRI-STEEM Corporation (DriSteem), the leading manufacturer of humidification, evaporative cooling, and water treatment products, announced today the release of its latest whitepaper titled “Using Dricalc to Confidently and Easily Specify and Select Humidification Systems.” 

DriSteem’s mission is to provide customers with exceptional service and superior products and has developed DriCalc® Sizing and Selection software to provide an easy way for Engineers to navigate the process of selecting a humidification system to meet their needs. Engineers face many challenges when designing HVAC systems; demanding customers, tight schedules, limited budgets, competing requirements, new and changing technologies, and meeting rigorous standards. DriSteem understands these challenges and is committed to making the process of selecting the best humidification system as easy as possible, while ensuring that the selected systems will perform as expected. 

2020 10 21 101600

This white paper is aimed toward engineers and includes four main goals: an introduction to incorporating humidification intodesigns, an overview of what the DriCalc software offers, benefits that the DriCalc software brings to the design team, and information about accessibility and training options. 

The full paper is available to all and can be downloaded following the link below:

https://dristeem.azureedge.net/public-documents/docs/default-source/azure-public/white-paper/white-paper_using-dricalc-to-confidently-and-easily-specify-and-select-humidification-systems.pdf?sfvrsn=5a8334f7_2

“We are excited to bring this whitepaper to the Engineers and HVAC communities.  It offers factual and pertinent information to help select DriSteem humidification systems with ease,” said Valerie Bradt, DriSteem Communications Manager. 

About DriSteem:

DriSteem is a premier provider of humidification, evaporative cooling, and water treatment solutions for commercial and industrial applications.  DriSteem offers custom systems for critical indoor environments such as health care, data centers, and other facilities requiring precise control of moisture in the air. 

DriSteem’s 50-year history of development and innovation has resulted in multiple patented designs that not only meet, but anticipate, customers’ unique needs.  DriSteem is a subsidiary of Research Products Corporation, manufacturer of Aprilaire®, the leading residential humidifier brand, as well as air cleaners, heat-recovery systems and HVAC accessories.   

Visit DriSteem at www.dristeem.com

Gas to liquids (GTL) plants can be installed at oil production facilities to capture the associated gas that is otherwise flared off. This approach provides oil producers with an additional way of generating revenue, says GlobalData, a leading data and analytics company.

GlobalData’s latest thematic report, ‘Gas to Liquids (Oil and Gas) – Thematic Research’, highlights the potential opportunities and challenges that can influence the GTL market.

A key opportunity for the GTL market is in the landlocked countries with significant natural gas production. Turkmenistan’s state concern Turkmengaz currently operates a 15,500 bpd GTL plant, with plans to further expand its GTL portfolio.

Various high value products can be obtained from GTL conversion, including gasoline, diesel, naphtha and waxes.

The process of GTL conversion also results in the production of cleaner fuels that offer better environmental performance over conventional fuels produced from crude oil.

Ravindra Puranik, Oil & Gas Analyst at GlobalData, comments: “GTL products use natural gas as feedstock, which is a low carbon energy source. Hence, the fuels produced from GTL are also relatively low on emissions than crude oil-based fuels. The GTL fuels have a higher hydrogen-to-carbon (H/C) ratio. These products are also low on impurities of sulfur compounds, as compared to the conventional fuels generated from crude oil. This translates to better environmental performance of GTL fuels.”

2020 10 21 100722

Capital expenditure required for constructing large-scale GTL plants are generally on the higher side when compared to conventional refineries. High capital cost has been a major deterrent for the development of larger GTL plants worldwide.

Puranik adds: “Projects that were likely conceptualized when oil prices averaged at US$80 or so, may find themselves under stress amid the ongoing oil price downturn as a result of the COVID-19 pandemic. It is crucial for GTL operators to successfully navigate through the coming months in order to survive in the long-term.”

GlobalData’s thematic research identifies Chevron, PetroSA, Qatar Petroleum, Royal Dutch Shell and Turkmengaz, among the leaders in the GTL theme in the oil and gas industry. It also highlights some of the major GTL technology providers for oil and gas industry, namely BgtL Inc, Calvert Energy, CompactGTL, Gas Technologies LLC, Greyrock, Haldor Topsøe, INFRA Technology, Primus Green Energy, Sasol Ltd, and Velocys.

A number of technology vendors have developed variants of the GTL process that can be implemented in a modular fashion at a smaller scale. Governmental pressure on oil companies to reduce their carbon footprints could prompt these companies to adopt small-scale, modular, and portable GTL technologies in their operations. 

Puranik concludes: “By reducing gas flaring, companies can effectively meet their emission targets to mitigate climate change. Moreover, cleaner GTL liquids can be marketed as an alternative fuel. Thereby, companies can increase their portfolio of higher value finished products.”

About GlobalData

4,000 of the world’s largest companies, including over 70% of FTSE 100 and 60% of Fortune 100 companies, make more timely and better business decisions thanks to GlobalData’s unique data, expert analysis and innovative solutions, all in one platform. GlobalData’s mission is to help our clients decode the future to be more successful and innovative across a range of industries, including the healthcare, consumer, retail, financial, technology and professional services sectors.

DEPCOM Power and their system integrator partner Vertech use Seeq to support data-based decision making for performance optimization across wide-ranging solar power generation assets.

2020 10 21 100227Seeq Corporation, a leader in manufacturing and industrial internet of things (IIoT) advanced analytics software, announces the release of a new success story bylined by their customer DEPCOM Power and system integrator Vertech. Titled “Don’t Look at the Sun—Look at the Data,” the story shows how DEPCOM, based in Scottsdale Arizona, uses Seeq to improve operating efficiency and optimize maintenance across multiple solar generation sites. The story further describes how DEPCOM Power found a better way to create insights from the wealth of data sourced from multiple solar generation sites. The full story is available at https://info.seeq.com/DEPCOM-power-case-study .

At DEPCOM, programmable logic controllers (PLCs), supervisory control and data acquisition (SCADA) systems, and historians were already providing extensive weather, power controller, and position tracking data and automation. The performance engineering team had invested years of effort creating and fine-tuning spreadsheets to view and analyze this data, both live and historical.

But the spreadsheets became enormous, making this approach burdensome in practice and difficult for collaboration, and introduced delays and the possibility of user error. DEPCOM desperately needed to efficiently apply their deep expertise.

Realizing there must be a better way, DEPCOM engaged Vertech, a systems integrator based in Phoenix AZ, to develop a solution based on Seeq’s Server, Workbench, and Organizer applications. Seeq empower engineers and subject matter experts to rapidly investigate, collaborate, and share insights to improve operations and business outcomes.

Seeq was selected for its abilities to:

  • · Connect with most any type of historian
  • · Work well with time-series process data
  • · Cost-effectively be procured, installed, run, and maintained
  • · Scale for any size application
  • · Flexibly enable users to configure, run, and report on varying assets

2020 10 21 100144An architecture consisting of a centralized enterprise “hub” and many local site “spokes” was quickly established, and Seeq was linked to Canary Labs historians. Seeq connected to and indexed the source data for best fidelity—never moving, copying, or transforming the data. Modular and hierarchical asset tree model structures matched the available data with the physical world in a logical way, aiding with identification, deployment, and re-use of configurations.

Analyses and dashboard displays were readily arranged to evaluate operations against industry-standard benchmarks and calculations including expected performance level, instantaneous generation, and other energy key performance indicators. Users can delve into the details and share their investigations as they develop insights.

Seeq has been instrumental for empowering DEPCOM’s experts to apply their expertise and provide timely reports to their solar site clients for optimizing operations, while freeing up performance engineers to work on other tasks.

To learn more about Seeq, visit: www.seeq.com

About Seeq Corporation

Founded in 2013, Seeq enables manufacturing organizations to rapidly find and share data insights. Oil & gas, pharmaceutical, specialty chemical, utility, renewable energy and numerous other vertical industries rely on Seeq to improve production outcomes, including yield, margins, quality, and safety. Headquartered in Seattle, Seeq is a privately held virtual company with employees and partners in the United States, Asia, Canada, Europe, and South America. 

Contact: Michael Risse

Tel: 206 801 9339

This email address is being protected from spambots. You need JavaScript enabled to view it.

Company’s software and project expertise enables expedited timeline and on-time start for new BP-operated platform

Emerson (NYSE: EMR) has been awarded a $14 million contract to provide automation technologies for the new Azeri Central East offshore platform in the Caspian Sea, the latest development in the Azeri-Chirag-Deepwater Gunashli oilfield. Emerson will serve as the main automation contractor, providing its Project Certainty methodologies and digital technologies that transform capital project execution to help BP bring this fast-track project onstream in 2023.

Digital twin solutions and cloud engineering services, part of Emerson’s Project Certainty methodologies, will help accelerate project execution. Emerson’s digital twin solution enables virtual testing and system integration while the platform is being built and provides a simulated environment for platform operators to train, helping ensure a safe, smooth start-up and ongoing operational excellence. Cloud engineering reduces engineering costs and time by enabling global teams to collaborate and engineer in parallel, regardless of location.

2020 10 21 095653

Emerson will apply its portfolio of automation software and services to help BP achieve greater production and safe operations. This includes Emerson’s DeltaV™ automation system that controls critical safety functions in addition to wellhead production, drilling and the transfer of oil and gas to the onshore Sangachal Terminal.

Automation technologies also anticipate safety risks and enable remote monitoring, which reduces exposure of people and extends intervals between major maintenance turnarounds. Wired and wireless networks will connect more than 1,000 Emerson measurement instruments to monitor pressure, flow, temperature and pipework corrosion. Emerson will also provide all critical control, emergency shutdown and isolation valves, connected by its digital positioning technology.

“This latest project builds on the successful collaboration between BP and Emerson on the West Chirag and Shah Deniz Stage 2 developments,” said Jim Nyquist, group president for Emerson’s systems and software business. “Our extensive experience helping organisations achieve capital project success has enabled us to become a trusted partner to digitally transform mega projects such as Azeri Central East.”

About Emerson  
Emerson (NYSE: EMR), headquartered in St. Louis, Missouri (USA), is a global technology and engineering company providing innovative solutions for customers in industrial, commercial and residential markets. Our Automation Solutions business helps process, hybrid and discrete manufacturers maximise production, protect personnel and the environment while optimising their energy and operating costs. Our Commercial & Residential Solutions business helps ensure human comfort and health, protect food quality and safety, advance energy efficiency and create sustainable infrastructure. For more information visit Emerson.com.

~ Beckhoff’s latest innovation in automation without cabinets for food manufacturing ~

Beckhoff Automation UK has launched the AMP8000 servo system, the latest product in the company’s automation without cabinets range. The AMP8000 features a servomotor with a rear-mounted servo drive for a reduced size and can provide complex motion control with minimal cabling requirements.

Because many factories across the globe have temporarily closed, and many workers have been furloughed, industry is struggling to meet demand. As a result, manufacturers need compact, uncomplicated systems to help maximise productivity. The AMP8000 will find a home on food production lines, where its core technological advantages can help improve profits.

The AMP8000 comprises a servo drive directly mounted onto a servomotor, making the design compact and easier to integrate into complex automation machine designs. The rear-mounted drive means that the AMP8000 occupies a similar footprint to a standard servomotor, making it easy to fit into existing machines without modification. The design also improves heat dissipation and reduces motor derating compared to conventional, top-mounted designs.

By relocating the power electronics directly onto the servomotor, the control cabinet only needs to house a single coupling module to supply power to several servo systems. The AMP8000 also makes use of Beckhoff’s EtherCAT P cable technology, combining 24V power and EtherCAT communication into a single standard Ethernet cable.

2020 10 21 092824

“As food production lines become more densely packed with complex automated machinery, many businesses are encountering a problem in terms of available space,” explains Stephen Hayes, managing director of Beckhoff UK. “Most complex automation requires a vast amount of cabling, which in turn increases the size of control cabinets. These, alongside the growing footprint of automated machinery, occupies space and impacts on output per square metre.

“Now more than ever, the ability to maximise output is vital for industrial businesses. The AMP8000 is designed to help achieve this. In plants, it can significantly reduce cabling requirements due to its EtherCAT P technology and the use of coupling modules. For machine builders, it allows for the development of more complex machinery with smaller footprints and faster site installation time.”

Beckhoff has designed two types of coupling module to accompany the AMP8000. The AMP8620 is a power supply module that allows for safe and direct connection to the mains supply for the servo systems, reducing the footprint and cabling complexity of machinery. This module contains all required circuitry for safe connection and include two EtherCAT P outputs to connect to other modules.

The other module is the AMP8805 distribution module, which provides power and communication to up to five AMP8000 systems using a single EtherCAT P cable each. This allows even complex machines and lines to be connected with minimal cabling and a simple topology.

Engineers or plant managers interested in the AMP8000 or wanting to learn more about the technology can speak to the Beckhoff Automation UK team at 01491 410539

About Beckhoff: Beckhoff Automation implements open automation systems based on PC Control technology. The product range covers Industrial PCs, I/O and Fieldbus components, drive technology and automation software, and all products can be used as separate components or integrated into a complete and seamless control system are available for all industries. Its New Automation Technology philosophy represents universal and open control and automation solutions that are used worldwide in a wide variety of different applications, ranging from CNC-controlled machine tools to intelligent building automation.

Ref: BEC180/09/20

Innovative platform to be delivered across entire fleet of industry-leading vapor recovery, wellhead compression, and gas lift units

Flogistix, an oil and gas technology company, today announced a new collaboration with San Francisco-based UrsaLeo to develop and apply digital twin technology across its entire fleet of industry-leading vapor recovery, wellhead compression, and gas lift units. UrsaLeo is an enterprise software company that enables users to visualize operational data in a photorealistic 3D representation of their facility or product.

“Our collaboration with UrsaLeo will push our technology into the future and transform the way we deliver innovation,” said Mims Talton, President and CEO of Flogistix. “Software has played an ever-increasing role in delivering superior products and customer service. It is exciting to think of the ways we can impact operations with the use of digital twins.”

2020 10 21 094210

UrsaLeo and Flogistix are using Unity, a gaming development software, to create photorealistic virtual assets of their equipment. The virtual assets are then paired with supervisory control and data acquisition (SCADA) data and machine learning to predict equipment or part failures and perform remote repairs. Flogistix also plans to use the digital twin technology when testing new technology and training fuel technicians and mechanics.

The technology will be available for use on mobile iOS devices allowing for more transparency and collaboration between Flogistix and their customers.

“With this collaboration, our team will help Flogistix further monitor and evolve the way users interact with the data they collect,” said John Burton, CEO of UrsaLeo. “Flogistix’s enthusiastic adoption of Digital Twin technology improves operational performance, improves safety, provides an intuitive interface, and offers a digital command center for remote monitoring, sales and marketing, and also training.” 

For further information, please contact This email address is being protected from spambots. You need JavaScript enabled to view it. or Drake Andarakes, VP of Sales and Marketing This email address is being protected from spambots. You need JavaScript enabled to view it.

About Flogistix

Flogistix is an oil and gas technology company that utilizes an engineered approach to help customers with their wellhead compression, vapor recovery, and gas lift needs. With more than 17 years of experience in the oil and gas industry, Flogistix operates throughout most of the onshore producing basins in the United States. From the company’s manufacturing facilities in Pampa, Texas and Gillette, Wyoming, Flogistix supports 12 strategically placed service centers. This expansive service facility network allows Flogistix to deliver superior customer service and well optimization strategies. For more information, visit https://flogistix.com/.

 About UrsaLeo

UrsaLeo is an enterprise software company that enables users to visualize operational data in a photorealistic 3D representation of their facility or product. Backed by a powerful end-to-end IoT platform, UrsaLeo displays data from multiple systems to create a digital command center for all facilities or product information. Pulling in data from sensors, assets and maintenance databases, and other IoT systems, the UrsaLeo 3D system displays mind blowing visualizations, directs users automatically to user defined events, allows recording and replaying of the entire system during failures, accelerates triage response time, allows remote collaboration, and eliminates training needs. UrsaLeo was founded by manufacturing and software engineering experts with more than 50 years of industry expertise. For more information visit https://www.ursaleo.com.

Alfa Laval – a world leader in heat transfer, centrifugal separation and fluid handling – has won two orders to supply compact heat exchangers to a petrochemical plant in China and a refinery in Mexico. The orders have a combined total value of approximately SEK 130 million and were booked late September in the Welded Heat Exchangers unit of the Energy Division. Deliveries are scheduled for 2021 and 2022.  

2014 08 14 093039 alfa lavalThe orders comprise Alfa Laval Packinox heat exchangers which will be used in different heating and cooling applications in the refinery and petrochemical plant to enable energy-efficient processes.

“We had two more large orders booked late in September and they were related to our Alfa Laval Packinox heat exchangers,” says Susanne Pahlén Åklundh, President of the Energy Division. “When installed in our customers’ processes our energy efficient heat exchangers save energy and reduce CO2 emissions. Thereby they contribute to more sustainable industrial processes which is good for both people and planet.”

Did you know that… an Alfa Laval Packinox heat exchanger is more efficient and compact than traditional technologies and one single unit can replace up to four shell-and-tube heat exchangers in refinery and petrochemical applications? 

This is Alfa Laval 

Alfa Laval is active in the areas of Energy, Marine, and Food & Water, offering its expertise, products, and service to a wide range of industries in some 100 countries. The company is committed to optimizing processes, creating responsible growth, and driving progress – always going the extra mile to support customers in achieving their business goals and sustainability targets.

Alfa Laval’s innovative technologies are dedicated to purifying, refining, and reusing materials, promoting more responsible use of natural resources. They contribute to improved energy efficiency and heat recovery, better water treatment, and reduced emissions. Thereby, Alfa Laval is not only accelerating success for its customers, but also for people and the planet. Making the world better, every day. It’s all about Advancing better™.

Alfa Laval has 17,500 employees. Annual sales in 2019 were SEK 46.5 billion (approx. EUR 4.4 billion). The company is listed on Nasdaq OMX.

www.alfalaval.com

Brenntag, the global market leader in chemical and ingredients distribution, is introducing a new operating model. As per January 2021, the company will be steered in two global divisions with strong focus on customer and supplier needs and derived from this, a distinct market approach: Brenntag Essentials and Brenntag Specialties. The new operating model is a core element of the company’s transformation program "Project Brenntag" that aims to set the base for sustainable organic earnings growth in a rapidly changing global market environment.

  • As per January 1, 2021, Brenntag will operate with two global divisions: Brenntag Essentials and Brenntag Specialties 
  • Based on its core as full-line distributor of chemicals and ingredients, Brenntag will gain a sharpened profile towards relevant industry segments
  • Christian Kohlpaintner, CEO Brenntag Group: “The two Brenntag divisions with their clear focus, differentiated steering and distinct market approach will create even stronger partnerships with customers and suppliers.”

Full-line chemical and ingredients distribution will remain the core of Brenntag’s business model. Brenntag continues to offer the most comprehensive portfolio of chemical products, ingredients, and value-added services in the industry. With the two new divisions the company will better leverage on its strengths while sharpening its profile towards relevant industry segments.

2020 10 14 091802

Christian Kohlpaintner, Chief Executive Officer of Brenntag Group, said: “We are in a leading position globally and have a resilient business model. However, the requirements of our business partners and industry change. By setting up two global champions with a differentiated steering approach and addressing the diverse markets needs and expectations, we develop our company to lead our industry as preferred partner for customers and suppliers.”

Brenntag Essentials 

Brenntag Essentials will market a broad portfolio of process chemicals across a wide range of industries and applications. The division will leverage scale with flexible and cost-efficient delivery at competitive prices and a highly efficient business process backend. Brenntag Essentials builds on its global reach and comprehensive product portfolio and continues to follow a geographic and regional logic. “Brenntag Essentials will be the agile, lean, and efficient distribution partner of customers and suppliers in local geographies in a broad range of industries. It stands for superior customer proximity and local market know-how”, said Steven Terwindt, Member of the Management Board of Brenntag Group and future COO Brenntag Essentials.

Brenntag Specialties 

Brenntag Specialties will focus on ingredients and value-added services that are directly used in the production of the customers' end-products. The division will thus focus on selected industries: Nutrition, Pharma, Personal Care / HI&I (Home, Industrial & Institutional), Material Science (Coatings & Constructions, Polymers, Rubber), Water Treatment and Lubricants. These focus industries are large globally relevant industries with significant solutions potential and characterized by high regulatory requirements. “The division will more consequently leverage the full potential of our product and ingredients portfolio, which is the broadest in the market, and our unique technical and application expertise. Thus, we will capture untapped opportunities together with our business partners”, said Henri Nejade, Member of the Management Board of Brenntag Group and future COO Brenntag Specialties. 

Both Brenntag divisions will equally contribute to strengthening and expanding Brenntag’s global market leading position in specialties and full-line chemical distribution. Their differentiated market approach is backed by a globally consistent and advanced customer segmentation and a customized sales organization designed to reinforce Brenntag’s leadership in sales and customer service in the chemical distribution industry.

New Management Board responsibilities

In accordance with the new operating model, roles and responsibilities in the Management Board of Brenntag AG will partly change as per January 1, 2021. Besides CEO (Christian Kohlpaintner) and CFO (Georg Müller), the roles of two Chief Operating Officers (COO) are introduced: While Steven Terwindt will take over the responsibility for Brenntag Essentials as COO, Henri Nejade will lead Brenntag Specialties as COO. Furthermore, Brenntag will introduce the role of a Chief Transformation Officer (CTO) who has yet to be appointed. The CTO will be amongst others responsible for the overall transformation process initiated, drive functional excellence and the digital transformation of Brenntag, completing the future five-member Management Board. In addition, Brenntag has already appointed the new Level-1 Leadership Team members, who will drive the implementation and execution of the new operating model.

About Brenntag:

Brenntag is the global market leader in chemical and ingredients distribution. We connect our suppliers and customers in value-adding partnerships. Our almost 17,500 employees provide tailor-made application, marketing and supply chain solutions. Technical and formulation support, market, industry and regulatory expertise as well as advanced digital tools are just some examples of our services that are aiming to create an excellent customer experience. Our full-line portfolio comprises specialty and industrial chemicals and ingredients of a world-class supplier base. Building on its long-standing experience, unmatched global reach and local excellence, Brenntag works closely alongside its partners to make their business more successful. We are committed to contribute towards greater sustainability in our own business and the industries we serve, and to achieve sustainable profitable growth. Headquartered in Essen (Germany) and with regional headquarters in Philadelphia, Houston and Singapore, Brenntag operates a unique global network with more than 640 locations in 77 countries. The company generated sales of EUR 12.8 billion (USD 14.4 billion) in 2019. Brenntag shares are traded at the Frankfurt Stock Exchange (BNR).

International technology Group ANDRITZ has received an order from Keppel Seghers to supply flue gas treatment systems for the IWMF Phase 1 WTE (Waste-to-Energy) facilities in Singapore.

IWMF and the Tuas Water Reclamation Plant (Tuas WRP) – collectively known as the Tuas Nexus – will be the world’s first integrated waste and water treatment facility to be conceptualised and planned from the ground up. IWMF Phase 1 and the TWRP are scheduled for completion in 2025. Once completed, IWMF Phase 1 will be able to treat:

  • 2,900 tons per day of incinerable waste;
  • 250 tons per day of household recyclables collected under the National Recycling Programme;
  • 400 tons per day of source-segregated food waste; and
  • 800 tons per day of dewatered sludge from the Tuas Water Reclamation Plant

ntegrated waste and water treatment facility, Singapore. Copyright: NEAntegrated waste and water treatment facility, Singapore. Copyright: NEA

ANDRITZ’s scope of supply for the four WTE lines in IWMF Phase 1 includes the design and supply of flue gas treatment equipment such as fabric filters, HCl and SO2 scrubbers, ID fans, low-temperature economizers with steam gas reheaters, steel structures, flue gas ducts, tanks and silos, and advisory services.

Using ANDRITZ equipment at IWMF Phase 1 will help Singapore achieve its sustainability goals because it will be able to meet the highest environmental standards and reduce the emissions from incineration of 2,900 tons per day of incinerable waste.

A Keppel Seghers-led consortium was selected by Singapore’s National Environment Agency to develop and build (on EPC basis) the WTE and materials recovery facilities as part of the IWMF Phase 1 development for Singapore. ANDRITZ was chosen as the consortium’s key supplier for the flue gas treatment system due to its track record with dry, semi-dry and wet technologies for industrial flue gas cleaning as well as its advanced energy recovery solution using heat recovery from flue gas in the low temperature range.

ANDRITZ GROUP

International technology group ANDRITZ offers a broad portfolio of innovative plants, equipment, systems and services for the pulp and paper industry, the hydropower sector, the metals processing and forming industry, pumps, solid/liquid separation in the municipal and industrial sectors, as well as animal feed and biomass pelleting. The global product and service portfolio is rounded off with plants for power generation, recycling, the production of nonwovens and panelboard, as well as automation and digital solutions offered under the brand name of Metris. The publicly listed group today has around 27,800 employees and more than 280 locations in over 40 countries.

Page 1 of 357