Print

Tendeka launches one-trip remedial system to mitigate sand control failure in wells

To address the issue of sand control failure in wells, independent global completions service company Tendeka, has launched a new cost-effective single trip sand control solution.

The Filtrex remedial sand control system provides the flexibility to be installed thru-tubing, through the tightest of restrictions. The first of its kind, the Filtrex system provides the ability to perform sand clean out whilst installing the tool.

Eilidh McKay, technical support manager at TendekaEilidh McKay, technical support manager at TendekaUsing an open cell reticulated depth filter, the tool is run in hole compressed, once set, the filter will expand into the casing or failed screen filling the annular gap. The filtration is fully protected during deployment and will not be exposed until at the correct location. The tool will retain sand whilst allowing fluid flow through the depth filtration media. Once set, the tool requires no further intervention.

Eilidh McKay, technical support manager at Tendeka said: “Sand control failure is a common occurrence in the industry, and as such, there is a challenge to regain sand control in existing damaged completions without the requirement to perform a workover.

“The process of thru-tubing sand control can be costly and time consuming, requiring the removal of sand prior to installing a sand control solution, with most existing solutions enabling the wellbore to refill with formation sand reducing productivity, and are susceptible to erosion failure.”

In mature basins, sand issues account for eight percent of all shut in wells either due to failure of the existing sand screen or onset of sand production due to depletion or water production.

Filtrex prevents the need to perform a full workover. It will be the only tool on the market that can perform a sand clean out and install a permanent solution at the same time which prevents multiple trips.

Brad Baker, CEO of Tendeka added: “We have recently invested in a sand lab at our Aberdeen headquarters and have looked outside the box to come up with a simple and effective solution that can have a real impact on an industry-wide issue.

“We are known in the sector as sand management specialists and we are already seeing interest from several operators around the world.”

About Tendeka

Tendeka is a global specialist in advanced completions and production solutions for the oil and gas industry. From simple to complex well designs, the company has an extensive track record in enhancing productivity for clients’ reservoirs offshore and onshore. Tendeka invests in research and development, bringing to market disruptive technologies and offering solutions targeted to operators’ specific production challenges.

Established in 2009 and headquartered in Aberdeen, UK, Tendeka operates in strategically positioned bases, located at global energy hubs including the North Sea, Asia-Pacific, Middle East and USA.

To find out more, please visit: www.tendeka.com